2805/6/P
Model No. :
Brand : BEVS
The 2805/6/P is a dedicated accessory kit engineered to configure the BEVS Automatic Wet Abrasion Scrub Tester for precise compliance with the ISO 11998 and BS 3900 standards. This component is essential for accurately determining the wet-scrub resistance and cleanability of paint and coating films, supplying the specific load and non-woven abrasive pads mandated by the international protocol.
- Calibrated for ISO 11998 standard
- Uses standardized non-woven abrasive pads
- Applies required low test load
− Features
- International Standard Compliance: Meticulously engineered to meet the exact requirements of both ISO 11998 and BS 3900, ensuring globally recognized and comparable test data.
- Low-Force Load Application: The assembly is precisely weighted to exert a applied load, which corresponds to the lower-force requirements of this standard, suitable for evaluating the durability of interior decorative paints.
- Mandated Abrasive Media: Supplied with the required two non-woven abrasive pads that ensure the correct friction and wear mechanism specified by the protocol is applied to the coating surface.
- Plug-and-Play Integration: Designed for rapid, effortless mounting onto the reciprocating carriage of the BEVS Automatic Wet Abrasion Scrub Tester, facilitating quick standard changeovers.
- Ensures Test Validity: Using this official accessory prevents errors arising from incorrect mass or non-standard media, guaranteeing objective and defensible test results.
+ Standards
+ Resources
+ FAQs
Features
- International Standard Compliance: Meticulously engineered to meet the exact requirements of both ISO 11998 and BS 3900, ensuring globally recognized and comparable test data.
- Low-Force Load Application: The assembly is precisely weighted to exert a applied load, which corresponds to the lower-force requirements of this standard, suitable for evaluating the durability of interior decorative paints.
- Mandated Abrasive Media: Supplied with the required two non-woven abrasive pads that ensure the correct friction and wear mechanism specified by the protocol is applied to the coating surface.
- Plug-and-Play Integration: Designed for rapid, effortless mounting onto the reciprocating carriage of the BEVS Automatic Wet Abrasion Scrub Tester, facilitating quick standard changeovers.
- Ensures Test Validity: Using this official accessory prevents errors arising from incorrect mass or non-standard media, guaranteeing objective and defensible test results.
Technical Specifications
Application & Standards
Accessories
Software
FAQs
What specific test does the BEVS 2805/6/P accessory enable?
It enables the determination of wet-scrub resistance and cleanability of coatings in accordance with the ISO 11998 and BS 3900 standards.
How much weight does this accessory apply to the test panel?
The accessory applies a precise load, which is the specific mass required by the ISO 11998 standard for this type of durability assessment.
Why does ISO 11998 use a non-woven abrasive pad instead of a brush?
The non-woven pad is specified by ISO 11998 to simulate a different, often gentler, type of cleaning action (like wiping with a cloth or non-aggressive sponge), contrasting with the brush abrasion methods of other standards like ASTM D2486.
Is the ISO 11998 test performed wet or dry?
The ISO 11998 test is specifically a wet-scrub test, requiring a standardized amount of water or a mild cleaning agent to be applied to the test surface during the scrubbing cycles.
Is the accessory compatible with the BEVS 2806 and 2810 testers?
Yes, the 2805/6/P is designed to be compatible with the BEVS Automatic Wet Abrasion Scrub Tester series, including the BEVS 2806 and the upgraded BEVS 2810.
Related Products
Advancing research and development through reliable, high-quality scientific instruments tailored to your needs.
