Benchtop Laboratory Laminator
Model No. :
LL-100
Model No. : LL-100
Brand : Chem Instruments
This versatile system is engineered to consistently produce high-quality laminated samples (films, foils, papers) up to 23 inches wide for R&D and quality control testing. It features a rugged design with variable speed control and adjustable pneumatic pressure for highly repeatable lamination results.
-
Produces 23-inch wide laminated samples.
-
Features fully variable digital speed control.
-
Laminates materials with adjustable air pressure.
[acf_all_fields_accordion]
− Features
- Rugged construction, capable of withstanding the abuse of the production environment
- Produce laminated samples of unlimited length up to 23″ (58 cm) in width
- Top and bottom rolls are 2″ (5 cm) diameter by 24″ (61 cm) face width
- Top and bottom rolls have a steel core and are covered with 80 durometer silicone rubber
- Max opening at nip: 0.75 inch (20 millimeter)
- Bottom roll is driven, top roll idles
- Requires compressed air, 40 – 100 PSI
- Air pressure is adjustable for differing levels of laminating pressure
- Laminating pressure (LP) can be approximated using the following formula: LP = (3.4 x line pressure) / sample width
- Flow controls are included on both laminator cylinders to allow for smooth, safe operation
- Safety features include appropriate guarding and an emergency stop switch
- Universal input voltage from 85-265 VAC (50/60 Hz)
- Operating temperature range 32° – 150° F (0° – 70° C)
- Length of lamination can be measured
- Digital controls to control speed, unit of measure and jog functions
- Variable speed motor allows laminating speeds from 6 – 150 inches/minute (1 inch increments), 15 – 375 centimeters/minute (2.5 centimeter increments)
+ Technical Specifications
+ Resources
Features
- Rugged construction, capable of withstanding the abuse of the production environment
- Produce laminated samples of unlimited length up to 23″ (58 cm) in width
- Top and bottom rolls are 2″ (5 cm) diameter by 24″ (61 cm) face width
- Top and bottom rolls have a steel core and are covered with 80 durometer silicone rubber
- Max opening at nip: 0.75 inch (20 millimeter)
- Bottom roll is driven, top roll idles
- Requires compressed air, 40 – 100 PSI
- Air pressure is adjustable for differing levels of laminating pressure
- Laminating pressure (LP) can be approximated using the following formula: LP = (3.4 x line pressure) / sample width
- Flow controls are included on both laminator cylinders to allow for smooth, safe operation
- Safety features include appropriate guarding and an emergency stop switch
- Universal input voltage from 85-265 VAC (50/60 Hz)
- Operating temperature range 32° – 150° F (0° – 70° C)
- Length of lamination can be measured
- Digital controls to control speed, unit of measure and jog functions
- Variable speed motor allows laminating speeds from 6 – 150 inches/minute (1 inch increments), 15 – 375 centimeters/minute (2.5 centimeter increments)
Technical Specifications
| Electrical | 120/240 VAC, 50/60 Hz, 3 amps |
| Air Pressure | 40 – 100 PSI |
| Speed | 12 – 150 inches/minute (1 inch increments), 30 – 375 centimeters/minute (2.5 centimeter increments) |
| Physical Dimensions | Width: 40 inches (1026 centimeters) Depth: 11 inches (28 centimeters) Height: 18 inches (46 centimeters) |
| Max opening at Nip | 0.75 inch (20 millimeter) |
Application & Standards
Accessories
Software
FAQs
Related Products
Advancing research and development through reliable, high-quality scientific instruments tailored to your needs.
