Flex Durability Tester

High Precision Flexible Material Kneading Resistance

High Precision Flexible Material Kneading Resistance

High Precision Flexible Material Kneading Resistance

Model No. :

KFT-C

Model No. : KFT-C

Brand : Brugger

A specialized testing instrument designed to evaluate the fatigue and crack resistance of flexible barrier materials under repeated torsional stress. By simulating real-world handling and shipping conditions, it helps identify pinhole formation and structural degradation in composite films and foils.

  • Simultaneous testing of four sample stations

  • Microprocessor controlled motion for precise strokes

  • Intuitive touch display for parameter management

[acf_all_fields_accordion]

− Features

  • Specimen preparation according to international standards: The KFT-C is in according to the ASTM F 392-93 standard.
  • High reproducibility: Exactly the same stress simulations for all specimens, guarantees a high reproducibility for the following tests.
  • Easy handling: One selector switch for all testing conditions in accordance to the ASTM F 392-93.
  • Test stops automatically: The running preconditioning stops after the set numbers of cycles had been reached.
  • Enhanced testing conditions: Using customized numbers of cycles – from 1 up to 999999 – the specimen’s preparation can be adapted to the customer’s special needs.
  • Long lifetime: High-quality manufacturing guarantees an extended longevity.
  • Health and safety: Interlock and safety cover reduce the risk of injury during the specimen preparation.
  • Future: The device meets the increasing QC requirements of the packaging industry

+ Technical Specifications

+ Standards

Features
  • Specimen preparation according to international standards: The KFT-C is in according to the ASTM F 392-93 standard.
  • High reproducibility: Exactly the same stress simulations for all specimens, guarantees a high reproducibility for the following tests.
  • Easy handling: One selector switch for all testing conditions in accordance to the ASTM F 392-93.
  • Test stops automatically: The running preconditioning stops after the set numbers of cycles had been reached.
  • Enhanced testing conditions: Using customized numbers of cycles – from 1 up to 999999 – the specimen’s preparation can be adapted to the customer’s special needs.
  • Long lifetime: High-quality manufacturing guarantees an extended longevity.
  • Health and safety: Interlock and safety cover reduce the risk of injury during the specimen preparation.
  • Future: The device meets the increasing QC requirements of the packaging industry
Testing Standard Reproducible simulation of mechanical stress to determine the flex durability on films in accordance to the ASTM F392-74 standard
Specimen dimension DIN A4 / 210 mm x 295 mm
Compressive strain (long stroke) 155 mm
Compressive strain (short stroke) 80 mm
Angle of twist (long stroke) 440° (the first 90mm during the compressive strain)
Angle of twist (short stroke) 400° (during the complete 80mm compressive strain)
Testing conditions according the ASTM F392-74 standard Condition A: long stroke / 2700 Cycles Condition B: long stroke / 900 Cycles Condition C: long stroke / 270 Cycles Condition D: long stroke / 20 Cycles Condition E: short stroke / 20 Cycles
Additional testing conditions long stroke / 1 up to 999999 Cycles short stroke / 1 up to 999999 Cycles
Stroke frequency approximately 45 per minute
Dimensions 69 x 27 x 30 cm
Weight 27.5 kg
Storage temperature 10°C – 40°C
Operating temperature 15°C – 35°C
Relative humidity 80% maximum, not condensing
Electrical connection 100 – 240 V/50 – 60 Hz, Current maximum 1,5 A primary / 24 V DC, maximum 1,88 A secondary
Compressed air supply 5 up to 10 bar