Steel Substrates

Steel Panels For Coatings & Corrosion Testing

Steel Panels For Coatings & Corrosion Testing

Steel Panels For Coatings & Corrosion Testing

Model No. :

Brand : Q-Lab

Q-PANEL steel test substrates are globally recognized as the standard for providing a consistent, uniform surface, crucial for reliable research and quality control testing of various coatings. They successfully eliminate metal variability—a major source of bias—ensuring your critical paint, coating, and adhesion tests are accurate and reproducible worldwide.

  • Eliminates metal variability in critical tests
  • High-quality cold-rolled low-carbon steel
  • Available in wide range of sizes and finishes

[acf_all_fields_accordion]

− Features

Clean

The Q-PANEL production process thoroughly cleans panels and removes any oil from the surface. Special handling assures that all panels are completely clean when they are packaged. Steel panels are packed in plastic bags in quantities of 20 to 50 panels (depending on type and thickness), with a vapor phase rust inhibitor inside a sturdy cardboard carton, for a shelf life of several years.

Consistent

Three factors assure Q-PANEL substrates are consistent, high-quality, and low-cost:

  • Volume metal purchasing from selected mills
  • Automated production on a high-speed line
  • Rigorous inspection at several processing stages

Convenient

Panels are supplied pre-cleaned, with a 6 mm (¼”) Q-shaped hole (it’s our trademark and your assurance of quality). For safety and ease of handling, the panels have rounded corners and deburred edges. Our inventory of over a million paint test panels means that 95% of our orders are shipped from stock. In most cases, panels can be used right out of the box.

Economical

Because of Q-Lab’s high-volume production, Q-PANEL substrates cost less than you might expect for a standardized surface. Purchasing clean, safe, standardized panels reduces the time lab personnel must spend cleaning and handling panels.

+ Technical Specifications

+ Videos

Features

Clean

The Q-PANEL production process thoroughly cleans panels and removes any oil from the surface. Special handling assures that all panels are completely clean when they are packaged. Steel panels are packed in plastic bags in quantities of 20 to 50 panels (depending on type and thickness), with a vapor phase rust inhibitor inside a sturdy cardboard carton, for a shelf life of several years.

Consistent

Three factors assure Q-PANEL substrates are consistent, high-quality, and low-cost:

  • Volume metal purchasing from selected mills
  • Automated production on a high-speed line
  • Rigorous inspection at several processing stages

Convenient

Panels are supplied pre-cleaned, with a 6 mm (¼”) Q-shaped hole (it’s our trademark and your assurance of quality). For safety and ease of handling, the panels have rounded corners and deburred edges. Our inventory of over a million paint test panels means that 95% of our orders are shipped from stock. In most cases, panels can be used right out of the box.

Economical

Because of Q-Lab’s high-volume production, Q-PANEL substrates cost less than you might expect for a standardized surface. Purchasing clean, safe, standardized panels reduces the time lab personnel must spend cleaning and handling panels.

Smooth Finish Steel Panels (Type QD, D, and DT)

These have a smooth, bright finish. Type QD are 0.51 mm (0.020 in) thick, and are our smoothest panel. They are recommended for testing gloss and color, and are the best buy for many general applications. Type D and DT are very thin 0.25 mm (0.010 in), flexible panels. Type D offers the same smooth surface as Type QD, while Type DT panels are tin plated. These types are very inexpensive and are stocked in a limited number of sizes.

Matte Finish Steel Panels (Type R)

These are a dull matte mill finish produced by roughened rolls. This matte finish is representative of general purpose sheet metal applications. Because they are thicker, 0.81 mm (0.032 in), Type R panels are more rigid than Type QD.

Ground (Polished) Finish Steel Panels (Type S)

These are the same steel as Type R, with a thickness of 0.81 mm (0.032 in), but one side is polished by grinding it with an abrasive until the mill surface is completely removed. This imparts a smooth surface that looks similar to a “brushed” finish. The ground (or polished) surface frequently gives better adhesion results than a matte finish.

Painted Panels (Type WW, GW and WWS)

Are pre-coated in gray or white to eliminate the time required to prime test substrates. They are also available with black stripes and other patterns to test the hiding ability of a coating. They are 102 × 152 mm (4 × 6 in) and 0.20 mm (0.008 in) thick.

Iron Phosphate Treatment (Type R-XX-I, S-XX-I, R-XX-ICF, and S-XX-ICF)

These panels are pretreated with Bonderite M-FE 1000™, the most commonly used type of industrial iron phosphate. These panels incorporate either a chrome seal (-I) using Bonderite M-PT 60, or REACH/RoHS-compliant chrome-free seal (-ICF) using Bonderite M-PT 99X. Both options are followed by a virgin deionized water rinse. Iron phosphated panels have a coating weight of 323-646 mg/m2 (30-60 mg/ft2) and are 0.81 mm (0.032 in) thick.

Stainless Steel (Type SS) panels

Made from 304 stainless, in two sizes: 25 × 76 mm (1 × 3 in) and 76 × 152 mm (3 × 6 in). They are 0.035 in (0.89 mm) thick and do not have a Q-shaped hole.

Low Alloy Steel (Type HA and Type HN) panels

Made from AISI 4130 steel, which contains molybdenum and chromium as strengthening agents. These panels are 1 mm (0.040 in) thick. HA panels meet AMS 6350/6351 and HN panels meet AMS 6345. Type HA panels do not have a Q-shaped hole.

Adhesive Panels (Ground Finish) (Type RS)

Stocked in a 25 × 102 mm (1 × 4 in) size and 1.6 mm (0.063 in) thickness for testing adhesives. One side has a surface finish similar to Type S. These panels are thicker and harder than regular steel to resist the stress of lap shear testing and do not have a Q-shaped hole.

Taber® Abraser Panels (Type R-44-T and Type S-44-T)

Specially designed for use with the Taber Abraser Tester. They are 101 × 101 mm (4 × 4 in) and 0.81 mm (0.032 in) thick, with a circular hole in the center. Their surface finish corresponds with our Type R and Type S panels, respectively.

Steel Panel Sample Kits

Available for customers who may not know which steel alloy or finish they need. Each kit includes 5 panels of each of our most popular bare, treated, and specialty steel alloys

Custom Panels

Available for unique needs.

Related Products

Advancing research and development through reliable, high-quality scientific instruments tailored to your needs.