Specimen Holder
Model No. :
Brand : Taber
These precision-engineered specimen holders are designed to facilitate the secure mounting and rapid exchange of test samples on Taber Rotary Abrasers. Available in multiple configurations, they accommodate a vast array of material types, including rigid solids, flexible textiles, and moisture-sensitive samples.
-
Interchangeable tables for diverse material geometries
-
Quick mount design for efficient inspection
-
Specialized options for wet or dry testing
− Features
- Solutions for rigid and flexible specimens
- Perform dry or wet tests
- Test material thickness up to 40 mm with arm height extension kit
- Anodized for greater durability
+ Technical Specifications
+ Resources
Features
- Solutions for rigid and flexible specimens
- Perform dry or wet tests
- Test material thickness up to 40 mm with arm height extension kit
- Anodized for greater durability
Technical Specifications
| Model | Description |
| SH-125* | STANDARD – test most rigid or flexible specimens; includes a threaded center post with a clamp plate and nut to secure rigid materials, rubber pad (S-19) for a non-slip surface. Specimen hold-down ring (SH-101 or SH-102) recommended for testing flexible materials. |
| SH-12* | TALL – similar to SH-125, but sits 6.5 mm higher |
| SH-15* | TEXTILE, TENSIONING TYPE – similar to SH-125, but includes a raised wear track to provide extra tensioning to the material when the clamp plate is tightened in the center recess and hold down ring is drawn down over the edge of the holder. Includes SH-101 hold-down ring. |
| SH-19* | DRIVE-PIN TYPE – use for rigid, square specimens that do not have a center-mounting hole. One corner of the specimen is positioned between two pins while two adjustable clamps are used to secure the specimen in place. |
| SH-26* | SLIDING MOUNT – includes four adjustable mounts for testing four 50 mm square, rigid specimens |
| SH-75* | RIMMED – includes a 7.5 mm raised rim to retain liquids, allowing you to determine the effect of absorbed or surface moisture on a material’s resistance to abrasion. A rubber pad (S-19) prevents specimens from slipping during the test. |
| SH-101 | SPECIMEN HOLD DOWN RING “A” (108 mm ID) – for flexible materials. Use with SH-125 or SH-12 specimen holder. |
| SH-102 | SPECIMEN HOLD DOWN RING “B” (110 mm ID) – for flexible materials. Use with SH-125 specimen holder. |
| S-21 | EXTENSION NUT – use with SH-125 or when sample thickness is 6.5 mm to 12.5 mm. |
| S-23 | CLAMP PLATE (32 mm diameter) – use in conjunction with Scuffing Head Attachment when testing carpeting and other floor covering materials to prevent crushing of specimen fibers near the wear path. |
| 1700-40* | ARM HEIGHT EXTENSION KIT – accommodates specimen thickness up to 40 mm by raising the position of the abaser arms. A set of 6 shims is included to ensure the correct abaser arm alignment, and positioning of the abrasive wheels. |
*Intended for use with Taber Rotary Platform Abraser Models 1700 or 1750. Specimen holders are available for older style Taber Abrasers.
Application & Standards
Accessories
Software
FAQs
Related Products
Advancing research and development through reliable, high-quality scientific instruments tailored to your needs.
